How is VW DPF Removal done?
To remove the DPF we need to read the original software from your vehicle’s ECU. We use an interface to our dedicated computer system and can remove all DPF structures in the software. We can then programme the software to the ECU, remove the DPF from the vehicle leaving the temperature and pressure sensor on the exhaust so that it looks original. Once all our works are undertaken the vehicle will no longer attempt regenerations and no black smoke will appear, no DPF check light or engine management light will illuminate and you will have noticeably better MPG!
What is a VW DPF (Diesel Particulate Filter)?
European manufacturer standards have made particulate filters as commonplace in diesel vehicle exhausts as catalytic converters are in petrol ones. They were introduced to reduce diesel particulate (soot) emissions by around 80% and they work just like a ‘trap’, catching bits of soot in the exhaust. Think of the bag in the vacuum cleaner; just like with any filter they have to be emptied regularly to maintain performance. For a DPF this process is known as ‘regeneration’ where the collected soot is burnt off at a high temperature to leave a tiny ash residue.
Regeneration can take place automatically on motorway-type runs when the exhaust temperature is high for long periods of time. Most cars don’t get this sort of regular use and so manufacturers designed ‘active’ regeneration where the ECU (engine management computer) takes control of the process. If your journeys are normally short and around town the warning light will illuminate which usually indicates that the DPF is partially blocked. If the light is ignored soot will continue to build up and other dashboard lights will illuminate too. At this point your VW car will have to go to a garage to be looked at further.