Petrol

Audi A5 Mk2 2011 to 2016 2.0 TFSI remap

Standard this engine makes 211hp and 350Nm. Our STAGE 2 file takes it to 275hp and 400Nm.

+64horsepower
+50newton metres
3stages available

Where the power arrives

Power and torque through the rev range, on the STAGE 2 file.

Power before and after
0741492232971,0001,8252,6503,4754,3255,150 RPM 0741492232971,0002,3253,6504,975hp RPM
  • Standard 211hp
  • Remapped 275hp
Torque before and after
01082163244321,0001,8252,6503,4754,3255,150 RPM 01082163244321,0002,3253,6504,975Nm RPM
  • Standard 350Nm
  • Remapped 400Nm

Stages for this engine

Stage 1 needs nothing fitted. Anything above assumes the supporting hardware is on the car already.

Every figure for the 2.0 TFSI

FilePowerGainTorqueGainPrice
Standard211hpn/a350Nmn/an/a
ECOn/an/a380Nmup 30£450
STAGE 1260hpup 49380Nmup 30£550
STAGE 2275hpup 64400Nmup 50£688

Economy files show no new power figure because they are written for torque and drivability rather than peak output.

Remapping the 2.0 TFSI

The Audi A5 Mk2 2011 to 2016 2.0 TFSI runs a factory calibration built to cope with poor fuel, skipped servicing and hot countries. We rewrite the fuelling, boost and timing for this engine on this car, then test it before you get it back. The original file is kept, so it can go back to standard whenever you want.

On the petrol side the difference shows in throttle response and in how hard it pulls through the top half of the rev range. It feels sharper off idle and keeps going where it used to flatten out.

Figures on this page are for a standard car in good health. We read the fault codes and check the basics first, and if something needs attention we will tell you before we write anything. Have a look at the other engines on the Mk2 2011 to 2016, the full A5 range, or everything we do for Audi.

Other A5 generations

Book your A5

We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.