Caterpillar C10 All years 10.3 305hp (224kW) 1050Nm Stage 1
Takes the 10.3 305hp (224kW) 1050Nm from 305hp to 366hp, and 1050Nm to 1275Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 305hp
- Remapped 366hp
- Standard 1050Nm
- Remapped 1275Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 305hp | 366hp | up 61 |
| Torque | 1050Nm | 1275Nm | up 225 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the 10.3 305hp (224kW) 1050Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy 10.3 305hp (224kW) 1050Nm, and we check the car over before writing to it.
See the full 10.3 305hp (224kW) 1050Nm page for every file and figure, the other engines on this C10, or all Caterpillar remapping.
Other engines on this C10
Book your C10 Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.