Caterpillar C15 All years 14.6 515hp (379kW) 1650Nm Stage 1
Takes the 14.6 515hp (379kW) 1650Nm from 515hp to 602hp, and 1650Nm to 1992Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 515hp
- Remapped 602hp
- Standard 1650Nm
- Remapped 1992Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 515hp | 602hp | up 87 |
| Torque | 1650Nm | 1992Nm | up 342 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the 14.6 515hp (379kW) 1650Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy 14.6 515hp (379kW) 1650Nm, and we check the car over before writing to it.
See the full 14.6 515hp (379kW) 1650Nm page for every file and figure, the other engines on this C15, or all Caterpillar remapping.
Other engines on this C15
- 14.6 435hp (320kW) 1550Nm (435hp)
- 15.2 Acert 441hp (324kW) 2102Nm (441hp)
- 15.2 Acert 441hp (324kW) 2373Nm (441hp)
- 15.2 DPF 441hp (324kW) 2102Nm (441hp)
- 14.6 475hp (349kW) 1650Nm (475hp)
- 15.2 DPF 481hp (354kW) 2238Nm (481hp)
- 15.2 Acert 481hp (354kW) 2238Nm (481hp)
- 15.2 Acert 481hp (354kW) 2509Nm (481hp)
- 14.6 500hp (368kW) 1650Nm (500hp)
- 15.2 Acert 507hp (373kW) 2509Nm (507hp)
- 15.2 DPF 507hp (373kW) 2509Nm (507hp)
- 14.6 514hp (378kW) 1850Nm (514hp)
Book your C15 Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.