Caterpillar C15 All years 15.2 Acert 634hp (466kW) 2780Nm Stage 1
Takes the 15.2 Acert 634hp (466kW) 2780Nm from 634hp to 712hp, and 2780Nm to 3000Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 634hp
- Remapped 712hp
- Standard 2780Nm
- Remapped 3000Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 634hp | 712hp | up 78 |
| Torque | 2780Nm | 3000Nm | up 220 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the 15.2 Acert 634hp (466kW) 2780Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy 15.2 Acert 634hp (466kW) 2780Nm, and we check the car over before writing to it.
See the full 15.2 Acert 634hp (466kW) 2780Nm page for every file and figure, the other engines on this C15, or all Caterpillar remapping.
Other engines on this C15
- 14.6 435hp (320kW) 1550Nm (435hp)
- 15.2 DPF 441hp (324kW) 2102Nm (441hp)
- 15.2 Acert 441hp (324kW) 2102Nm (441hp)
- 15.2 Acert 441hp (324kW) 2373Nm (441hp)
- 14.6 475hp (349kW) 1650Nm (475hp)
- 15.2 Acert 481hp (354kW) 2509Nm (481hp)
- 15.2 DPF 481hp (354kW) 2238Nm (481hp)
- 15.2 Acert 481hp (354kW) 2238Nm (481hp)
- 14.6 500hp (368kW) 1650Nm (500hp)
- 15.2 Acert 507hp (373kW) 2509Nm (507hp)
- 15.2 DPF 507hp (373kW) 2509Nm (507hp)
- 14.6 514hp (378kW) 1850Nm (514hp)
Book your C15 Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.