Cummins QSX All years 375 14.95L 383hp (282kW) 1990Nm Stage 1
Takes the 375 14.95L 383hp (282kW) 1990Nm from 383hp to 460hp, and 1990Nm to 1980Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 383hp
- Remapped 460hp
- Standard 1990Nm
- Remapped 1980Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 383hp | 460hp | up 77 |
| Torque | 1990Nm | 1980Nm | up -10 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the 375 14.95L 383hp (282kW) 1990Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy 375 14.95L 383hp (282kW) 1990Nm, and we check the car over before writing to it.
See the full 375 14.95L 383hp (282kW) 1990Nm page for every file and figure, the other engines on this QSX, or all Cummins remapping.
Other engines on this QSX
- 350 14.95L 352hp (259kW) 1607Nm (352hp)
- 360 14.95L 362hp (266kW) 1652Nm (362hp)
- 390 14.95L 371hp (273kW) 1825Nm (371hp)
- 380 14.95L 383hp (282kW) 1580Nm (383hp)
- 400 14.95L 407hp (299kW) 1969Nm (407hp)
- 425 14.95L 428hp (315kW) 1952Nm (428hp)
- 450 14.95L 459hp (338kW) 2102Nm (459hp)
- 460 14.95L 462hp (340kW) 2370Nm (462hp)
- 475 14.95L 477hp (351kW) 2370Nm (477hp)
- 485 14.95L 494hp (363kW) 2365Nm (494hp)
- 500 14.95L 509hp (374kW) 2416Nm (509hp)
- 500 14.95L 509hp (374kW) 2365Nm (509hp)
Book your QSX Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.