Detroit Diesel MBE 900 (2002 >) All years MBE 906 6.4L 252hp (185kW) 660Nm Stage 1
Takes the MBE 906 6.4L 252hp (185kW) 660Nm from 252hp to 292hp, and 660Nm to 768Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 252hp
- Remapped 292hp
- Standard 660Nm
- Remapped 768Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 252hp | 292hp | up 40 |
| Torque | 660Nm | 768Nm | up 108 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the MBE 906 6.4L 252hp (185kW) 660Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy MBE 906 6.4L 252hp (185kW) 660Nm, and we check the car over before writing to it.
See the full MBE 906 6.4L 252hp (185kW) 660Nm page for every file and figure, the other engines on this MBE 900 (2002 >), or all Detroit Diesel remapping.
Other engines on this MBE 900 (2002 >)
- MBE 900 7.2L 192hp (141kW) 520Nm (192hp)
- MBE 906 6.4L 192hp (141kW) 520Nm (192hp)
- MBE 900 7.2L 212hp (156kW) 620Nm (212hp)
- MBE 906 6.4L 212hp (156kW) 520Nm (212hp)
- MBE 900 7.2L 232hp (171kW) 660Nm (232hp)
- MBE 906 6.4L 232hp (171kW) 660Nm (232hp)
- MBE 900 7.2L 252hp (185kW) 660Nm (252hp)
- MBE 926 7.2L 252hp (185kW) 660Nm (252hp)
- MBE 900 7.2L 262hp (193kW) 800Nm (262hp)
- MBE 906 6.4L 262hp (193kW) 700Nm (262hp)
- MBE 900 7.2L 280hp (206kW) 800Nm (280hp)
- MBE 926 7.2L 282hp (207kW) 800Nm (282hp)
Book your MBE 900 (2002 >) Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.