Deutz Agrotron All years 100 4.0 MK 101hp (74kW) 396Nm Stage 1
Takes the 100 4.0 MK 101hp (74kW) 396Nm from 101hp to 126hp, and 396Nm to 470Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 101hp
- Remapped 126hp
- Standard 396Nm
- Remapped 470Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 101hp | 126hp | up 25 |
| Torque | 396Nm | 470Nm | up 74 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the 100 4.0 MK 101hp (74kW) 396Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy 100 4.0 MK 101hp (74kW) 396Nm, and we check the car over before writing to it.
See the full 100 4.0 MK 101hp (74kW) 396Nm page for every file and figure, the other engines on this Agrotron, or all Deutz remapping.
Other engines on this Agrotron
- K90 4.0 R4 84hp (62kW) 372Nm (84hp)
- K410 4.0 R4 89hp (65kW) 382Nm (89hp)
- 90 4.0 R4 90hp (66kW) 372Nm (90hp)
- K100 4.0 R4 95hp (70kW) 396Nm (95hp)
- K420 4.0 R4 100hp (74kW) 413Nm (100hp)
- K110 6.1 R6 103hp (76kW) 418Nm (103hp)
- 110 6.1 MK 110hp (81kW) 417Nm (110hp)
- K610 4.0 R4 112hp (82kW) 436Nm (112hp)
- K430 4.0 R4 112hp (82kW) 492Nm (112hp)
- TTV 410 6.0 114hp (84kW) 521Nm (114hp)
- K120 4.0 R4 115hp (85kW) 447Nm (115hp)
- 120 6.1 MK 118hp (87kW) 476Nm (118hp)
Book your Agrotron Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.