Deutz Agrotron All years 1145 7.1 MK 143hp (105kW) 567Nm Stage 1
Takes the 1145 7.1 MK 143hp (105kW) 567Nm from 143hp to 185hp, and 567Nm to 675Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 143hp
- Remapped 185hp
- Standard 567Nm
- Remapped 675Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 143hp | 185hp | up 42 |
| Torque | 567Nm | 675Nm | up 108 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the 1145 7.1 MK 143hp (105kW) 567Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy 1145 7.1 MK 143hp (105kW) 567Nm, and we check the car over before writing to it.
See the full 1145 7.1 MK 143hp (105kW) 567Nm page for every file and figure, the other engines on this Agrotron, or all Deutz remapping.
Other engines on this Agrotron
- K90 4.0 R4 84hp (62kW) 372Nm (84hp)
- K410 4.0 R4 89hp (65kW) 382Nm (89hp)
- 90 4.0 R4 90hp (66kW) 372Nm (90hp)
- K100 4.0 R4 95hp (70kW) 396Nm (95hp)
- K420 4.0 R4 100hp (74kW) 413Nm (100hp)
- 100 4.0 MK 101hp (74kW) 396Nm (101hp)
- K110 6.1 R6 103hp (76kW) 418Nm (103hp)
- 110 6.1 MK 110hp (81kW) 417Nm (110hp)
- K610 4.0 R4 112hp (82kW) 436Nm (112hp)
- K430 4.0 R4 112hp (82kW) 492Nm (112hp)
- TTV 410 6.0 114hp (84kW) 521Nm (114hp)
- K120 4.0 R4 115hp (85kW) 447Nm (115hp)
Book your Agrotron Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.