Deutz Agrotron All years 1160 7.1 MK 154hp (113kW) 615Nm Stage 1
Takes the 1160 7.1 MK 154hp (113kW) 615Nm from 154hp to 198hp, and 615Nm to 750Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 154hp
- Remapped 198hp
- Standard 615Nm
- Remapped 750Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 154hp | 198hp | up 44 |
| Torque | 615Nm | 750Nm | up 135 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the 1160 7.1 MK 154hp (113kW) 615Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy 1160 7.1 MK 154hp (113kW) 615Nm, and we check the car over before writing to it.
See the full 1160 7.1 MK 154hp (113kW) 615Nm page for every file and figure, the other engines on this Agrotron, or all Deutz remapping.
Other engines on this Agrotron
- K90 4.0 R4 84hp (62kW) 372Nm (84hp)
- K410 4.0 R4 89hp (65kW) 382Nm (89hp)
- 90 4.0 R4 90hp (66kW) 372Nm (90hp)
- K100 4.0 R4 95hp (70kW) 396Nm (95hp)
- K420 4.0 R4 100hp (74kW) 413Nm (100hp)
- 100 4.0 MK 101hp (74kW) 396Nm (101hp)
- K110 6.1 R6 103hp (76kW) 418Nm (103hp)
- 110 6.1 MK 110hp (81kW) 417Nm (110hp)
- K610 4.0 R4 112hp (82kW) 436Nm (112hp)
- K430 4.0 R4 112hp (82kW) 492Nm (112hp)
- TTV 410 6.0 114hp (84kW) 521Nm (114hp)
- K120 4.0 R4 115hp (85kW) 447Nm (115hp)
Book your Agrotron Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.