Deutz Agrotron All years 200 7.1 MK 200hp (147kW) 865Nm Stage 1
Takes the 200 7.1 MK 200hp (147kW) 865Nm from 200hp to 258hp, and 865Nm to 985Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 200hp
- Remapped 258hp
- Standard 865Nm
- Remapped 985Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 200hp | 258hp | up 58 |
| Torque | 865Nm | 985Nm | up 120 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the 200 7.1 MK 200hp (147kW) 865Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy 200 7.1 MK 200hp (147kW) 865Nm, and we check the car over before writing to it.
See the full 200 7.1 MK 200hp (147kW) 865Nm page for every file and figure, the other engines on this Agrotron, or all Deutz remapping.
Other engines on this Agrotron
- K90 4.0 R4 84hp (62kW) 372Nm (84hp)
- K410 4.0 R4 89hp (65kW) 382Nm (89hp)
- 90 4.0 R4 90hp (66kW) 372Nm (90hp)
- K100 4.0 R4 95hp (70kW) 396Nm (95hp)
- K420 4.0 R4 100hp (74kW) 413Nm (100hp)
- 100 4.0 MK 101hp (74kW) 396Nm (101hp)
- K110 6.1 R6 103hp (76kW) 418Nm (103hp)
- 110 6.1 MK 110hp (81kW) 417Nm (110hp)
- K610 4.0 R4 112hp (82kW) 436Nm (112hp)
- K430 4.0 R4 112hp (82kW) 492Nm (112hp)
- TTV 410 6.0 114hp (84kW) 521Nm (114hp)
- K120 4.0 R4 115hp (85kW) 447Nm (115hp)
Book your Agrotron Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.