Deutz Agrotron All years 265 7.1 MK 250hp (184kW) 1028Nm Stage 1
Takes the 265 7.1 MK 250hp (184kW) 1028Nm from 250hp to 315hp, and 1028Nm to 1230Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 250hp
- Remapped 315hp
- Standard 1028Nm
- Remapped 1230Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 250hp | 315hp | up 65 |
| Torque | 1028Nm | 1230Nm | up 202 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the 265 7.1 MK 250hp (184kW) 1028Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy 265 7.1 MK 250hp (184kW) 1028Nm, and we check the car over before writing to it.
See the full 265 7.1 MK 250hp (184kW) 1028Nm page for every file and figure, the other engines on this Agrotron, or all Deutz remapping.
Other engines on this Agrotron
- K90 4.0 R4 84hp (62kW) 372Nm (84hp)
- K410 4.0 R4 89hp (65kW) 382Nm (89hp)
- 90 4.0 R4 90hp (66kW) 372Nm (90hp)
- K100 4.0 R4 95hp (70kW) 396Nm (95hp)
- K420 4.0 R4 100hp (74kW) 413Nm (100hp)
- 100 4.0 MK 101hp (74kW) 396Nm (101hp)
- K110 6.1 R6 103hp (76kW) 418Nm (103hp)
- 110 6.1 MK 110hp (81kW) 417Nm (110hp)
- K610 4.0 R4 112hp (82kW) 436Nm (112hp)
- K430 4.0 R4 112hp (82kW) 492Nm (112hp)
- TTV 410 6.0 114hp (84kW) 521Nm (114hp)
- K120 4.0 R4 115hp (85kW) 447Nm (115hp)
Book your Agrotron Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.