Deutz Agrotron All years K110 6.1 R6 103hp (76kW) 418Nm Stage 1
Takes the K110 6.1 R6 103hp (76kW) 418Nm from 103hp to 130hp, and 418Nm to 500Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 103hp
- Remapped 130hp
- Standard 418Nm
- Remapped 500Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 103hp | 130hp | up 27 |
| Torque | 418Nm | 500Nm | up 82 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the K110 6.1 R6 103hp (76kW) 418Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy K110 6.1 R6 103hp (76kW) 418Nm, and we check the car over before writing to it.
See the full K110 6.1 R6 103hp (76kW) 418Nm page for every file and figure, the other engines on this Agrotron, or all Deutz remapping.
Other engines on this Agrotron
- K90 4.0 R4 84hp (62kW) 372Nm (84hp)
- K410 4.0 R4 89hp (65kW) 382Nm (89hp)
- 90 4.0 R4 90hp (66kW) 372Nm (90hp)
- K100 4.0 R4 95hp (70kW) 396Nm (95hp)
- K420 4.0 R4 100hp (74kW) 413Nm (100hp)
- 100 4.0 MK 101hp (74kW) 396Nm (101hp)
- 110 6.1 MK 110hp (81kW) 417Nm (110hp)
- K430 4.0 R4 112hp (82kW) 492Nm (112hp)
- K610 4.0 R4 112hp (82kW) 436Nm (112hp)
- TTV 410 6.0 114hp (84kW) 521Nm (114hp)
- K120 4.0 R4 115hp (85kW) 447Nm (115hp)
- 120 6.1 MK 118hp (87kW) 476Nm (118hp)
Book your Agrotron Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.