Deutz Agrotron All years K410 4.0 R4 89hp (65kW) 382Nm Stage 1
Takes the K410 4.0 R4 89hp (65kW) 382Nm from 89hp to 110hp, and 382Nm to 445Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 89hp
- Remapped 110hp
- Standard 382Nm
- Remapped 445Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 89hp | 110hp | up 21 |
| Torque | 382Nm | 445Nm | up 63 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the K410 4.0 R4 89hp (65kW) 382Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy K410 4.0 R4 89hp (65kW) 382Nm, and we check the car over before writing to it.
See the full K410 4.0 R4 89hp (65kW) 382Nm page for every file and figure, the other engines on this Agrotron, or all Deutz remapping.
Other engines on this Agrotron
- K90 4.0 R4 84hp (62kW) 372Nm (84hp)
- 90 4.0 R4 90hp (66kW) 372Nm (90hp)
- K100 4.0 R4 95hp (70kW) 396Nm (95hp)
- K420 4.0 R4 100hp (74kW) 413Nm (100hp)
- 100 4.0 MK 101hp (74kW) 396Nm (101hp)
- K110 6.1 R6 103hp (76kW) 418Nm (103hp)
- 110 6.1 MK 110hp (81kW) 417Nm (110hp)
- K430 4.0 R4 112hp (82kW) 492Nm (112hp)
- K610 4.0 R4 112hp (82kW) 436Nm (112hp)
- TTV 410 6.0 114hp (84kW) 521Nm (114hp)
- K120 4.0 R4 115hp (85kW) 447Nm (115hp)
- 120 6.1 MK 118hp (87kW) 476Nm (118hp)
Book your Agrotron Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.