Iveco Cursor All years Cursor10 - 430 430hp (316kW) 2100Nm Stage 1
Takes the Cursor10 - 430 430hp (316kW) 2100Nm from 430hp to 501hp, and 2100Nm to 2300Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 430hp
- Remapped 501hp
- Standard 2100Nm
- Remapped 2300Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 430hp | 501hp | up 71 |
| Torque | 2100Nm | 2300Nm | up 200 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the Cursor10 - 430 430hp (316kW) 2100Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy Cursor10 - 430 430hp (316kW) 2100Nm, and we check the car over before writing to it.
See the full Cursor10 - 430 430hp (316kW) 2100Nm page for every file and figure, the other engines on this Cursor, or all Iveco remapping.
Other engines on this Cursor
- Cursor8 - 240 245hp (180kW) 950Nm (245hp)
- Cursor8 - 270 273hp (201kW) 1115Nm (273hp)
- Cursor8 - 300 296hp (218kW) 1110Nm (296hp)
- Cursor8 - 310 310hp (228kW) 1115Nm (310hp)
- Cursor8 - 350 350hp (257kW) 1280Nm (350hp)
- Cursor13 - 380 12.9 380hp (279kW) 1800Nm (380hp)
- Cursor10 - 400 400hp (294kW) 1900Nm (400hp)
- Cursor13 - 440 12.9 440hp (324kW) 2100Nm (440hp)
- Cursor13 - 480 12.9 480hp (353kW) 2200Nm (480hp)
- Cursor13 - 540 12.9 540hp (397kW) 2350Nm (540hp)
Book your Cursor Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.