Iveco Cursor All years Cursor13 - 480 12.9 480hp (353kW) 2200Nm Stage 1
Takes the Cursor13 - 480 12.9 480hp (353kW) 2200Nm from 480hp to 558hp, and 2200Nm to 2380Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 480hp
- Remapped 558hp
- Standard 2200Nm
- Remapped 2380Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 480hp | 558hp | up 78 |
| Torque | 2200Nm | 2380Nm | up 180 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the Cursor13 - 480 12.9 480hp (353kW) 2200Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy Cursor13 - 480 12.9 480hp (353kW) 2200Nm, and we check the car over before writing to it.
See the full Cursor13 - 480 12.9 480hp (353kW) 2200Nm page for every file and figure, the other engines on this Cursor, or all Iveco remapping.
Other engines on this Cursor
- Cursor8 - 240 245hp (180kW) 950Nm (245hp)
- Cursor8 - 270 273hp (201kW) 1115Nm (273hp)
- Cursor8 - 300 296hp (218kW) 1110Nm (296hp)
- Cursor8 - 310 310hp (228kW) 1115Nm (310hp)
- Cursor8 - 350 350hp (257kW) 1280Nm (350hp)
- Cursor13 - 380 12.9 380hp (279kW) 1800Nm (380hp)
- Cursor10 - 400 400hp (294kW) 1900Nm (400hp)
- Cursor10 - 430 430hp (316kW) 2100Nm (430hp)
- Cursor13 - 440 12.9 440hp (324kW) 2100Nm (440hp)
- Cursor13 - 540 12.9 540hp (397kW) 2350Nm (540hp)
Book your Cursor Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.