Iveco Cursor All years Cursor8 - 300 296hp (218kW) 1110Nm Stage 1
Takes the Cursor8 - 300 296hp (218kW) 1110Nm from 296hp to 349hp, and 1110Nm to 1230Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 296hp
- Remapped 349hp
- Standard 1110Nm
- Remapped 1230Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 296hp | 349hp | up 53 |
| Torque | 1110Nm | 1230Nm | up 120 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the Cursor8 - 300 296hp (218kW) 1110Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy Cursor8 - 300 296hp (218kW) 1110Nm, and we check the car over before writing to it.
See the full Cursor8 - 300 296hp (218kW) 1110Nm page for every file and figure, the other engines on this Cursor, or all Iveco remapping.
Other engines on this Cursor
- Cursor8 - 240 245hp (180kW) 950Nm (245hp)
- Cursor8 - 270 273hp (201kW) 1115Nm (273hp)
- Cursor8 - 310 310hp (228kW) 1115Nm (310hp)
- Cursor8 - 350 350hp (257kW) 1280Nm (350hp)
- Cursor13 - 380 12.9 380hp (279kW) 1800Nm (380hp)
- Cursor10 - 400 400hp (294kW) 1900Nm (400hp)
- Cursor10 - 430 430hp (316kW) 2100Nm (430hp)
- Cursor13 - 440 12.9 440hp (324kW) 2100Nm (440hp)
- Cursor13 - 480 12.9 480hp (353kW) 2200Nm (480hp)
- Cursor13 - 540 12.9 540hp (397kW) 2350Nm (540hp)
Book your Cursor Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.