Iveco Trakker All years Cursor13 - 410 12.9 410hp (301kW) 2100Nm Stage 1
Takes the Cursor13 - 410 12.9 410hp (301kW) 2100Nm from 410hp to 475hp, and 2100Nm to 2480Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 410hp
- Remapped 475hp
- Standard 2100Nm
- Remapped 2480Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 410hp | 475hp | up 65 |
| Torque | 2100Nm | 2480Nm | up 380 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the Cursor13 - 410 12.9 410hp (301kW) 2100Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy Cursor13 - 410 12.9 410hp (301kW) 2100Nm, and we check the car over before writing to it.
See the full Cursor13 - 410 12.9 410hp (301kW) 2100Nm page for every file and figure, the other engines on this Trakker, or all Iveco remapping.
Other engines on this Trakker
- T27 273hp (201kW) 950Nm (273hp)
- Cursor8 - 310 7.8 310hp (228kW) 1300Nm (310hp)
- T31 310hp (228kW) 1115Nm (310hp)
- Cursor8 - 310 7.8 330hp (243kW) 1400Nm (330hp)
- T33 330hp (243kW) 1400Nm (330hp)
- T35 352hp (259kW) 1280Nm (352hp)
- Cursor8 - 310 7.8 360hp (265kW) 1500Nm (360hp)
- T36 360hp (265kW) 1500Nm (360hp)
- T38 380hp (279kW) 1800Nm (380hp)
- T41 410hp (301kW) 1900Nm (410hp)
- Cursor13 - 450 12.9 450hp (331kW) 2200Nm (450hp)
- T45 450hp (331kW) 2200Nm (450hp)
Book your Trakker Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.