Iveco Trakker All years T45 450hp (331kW) 2200Nm Stage 1
Takes the T45 450hp (331kW) 2200Nm from 450hp to 516hp, and 2200Nm to 2520Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 450hp
- Remapped 516hp
- Standard 2200Nm
- Remapped 2520Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 450hp | 516hp | up 66 |
| Torque | 2200Nm | 2520Nm | up 320 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the T45 450hp (331kW) 2200Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy T45 450hp (331kW) 2200Nm, and we check the car over before writing to it.
See the full T45 450hp (331kW) 2200Nm page for every file and figure, the other engines on this Trakker, or all Iveco remapping.
Other engines on this Trakker
- T27 273hp (201kW) 950Nm (273hp)
- Cursor8 - 310 7.8 310hp (228kW) 1300Nm (310hp)
- T31 310hp (228kW) 1115Nm (310hp)
- Cursor8 - 310 7.8 330hp (243kW) 1400Nm (330hp)
- T33 330hp (243kW) 1400Nm (330hp)
- T35 352hp (259kW) 1280Nm (352hp)
- Cursor8 - 310 7.8 360hp (265kW) 1500Nm (360hp)
- T36 360hp (265kW) 1500Nm (360hp)
- T38 380hp (279kW) 1800Nm (380hp)
- Cursor13 - 410 12.9 410hp (301kW) 2100Nm (410hp)
- T41 410hp (301kW) 1900Nm (410hp)
- Cursor13 - 450 12.9 450hp (331kW) 2200Nm (450hp)
Book your Trakker Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.