Mack Trucks MP10 (2005 >) All years MP10-515 (US07) 16.1 515hp (379kW) 2522Nm Stage 1
Takes the MP10-515 (US07) 16.1 515hp (379kW) 2522Nm from 515hp to 560hp, and 2522Nm to 2382Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 515hp
- Remapped 560hp
- Standard 2522Nm
- Remapped 2382Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 515hp | 560hp | up 45 |
| Torque | 2522Nm | 2382Nm | up -140 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the MP10-515 (US07) 16.1 515hp (379kW) 2522Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy MP10-515 (US07) 16.1 515hp (379kW) 2522Nm, and we check the car over before writing to it.
See the full MP10-515 (US07) 16.1 515hp (379kW) 2522Nm page for every file and figure, the other engines on this MP10 (2005 >), or all Mack Trucks remapping.
Other engines on this MP10 (2005 >)
Book your MP10 (2005 >) Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.