Mack Trucks MP10 (2005 >) All years MP10-565 (US07) 16.1 564hp (415kW) 2675Nm Stage 1
Takes the MP10-565 (US07) 16.1 564hp (415kW) 2675Nm from 564hp to 614hp, and 2675Nm to 2900Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 564hp
- Remapped 614hp
- Standard 2675Nm
- Remapped 2900Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 564hp | 614hp | up 50 |
| Torque | 2675Nm | 2900Nm | up 225 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the MP10-565 (US07) 16.1 564hp (415kW) 2675Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy MP10-565 (US07) 16.1 564hp (415kW) 2675Nm, and we check the car over before writing to it.
See the full MP10-565 (US07) 16.1 564hp (415kW) 2675Nm page for every file and figure, the other engines on this MP10 (2005 >), or all Mack Trucks remapping.
Other engines on this MP10 (2005 >)
Book your MP10 (2005 >) Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.