Mack Trucks MP7 (2005 >) All years MP7-325E (US07) 10.8 329hp (242kW) 1707Nm Stage 1
Takes the MP7-325E (US07) 10.8 329hp (242kW) 1707Nm from 329hp to 389hp, and 1707Nm to 1998Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 329hp
- Remapped 389hp
- Standard 1707Nm
- Remapped 1998Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 329hp | 389hp | up 60 |
| Torque | 1707Nm | 1998Nm | up 291 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the MP7-325E (US07) 10.8 329hp (242kW) 1707Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy MP7-325E (US07) 10.8 329hp (242kW) 1707Nm, and we check the car over before writing to it.
See the full MP7-325E (US07) 10.8 329hp (242kW) 1707Nm page for every file and figure, the other engines on this MP7 (2005 >), or all Mack Trucks remapping.
Other engines on this MP7 (2005 >)
- MP7-325M (US07) 10.8 329hp (242kW) 1266Nm (329hp)
- MP7-345C (US07) 10.8 350hp (257kW) 1844Nm (350hp)
- MP7-355E (US04) 10.8 360hp (265kW) 1843Nm (360hp)
- MP7-365C (US04) 10.8 370hp (272kW) 1978Nm (370hp)
- MP7-365M (US04) 10.8 370hp (272kW) 1816Nm (370hp)
- MP7-395C (US04) 10.8 401hp (295kW) 2114Nm (401hp)
- MP7-405E (US04) 10.8 411hp (302kW) 1978Nm (411hp)
- MP7-405M (US04) 10.8 411hp (302kW) 2005Nm (411hp)
Book your MP7 (2005 >) Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.