Mack Trucks MP8 (2005 >) All years MP8-445C (US07) 12.0 452hp (332kW) 2251Nm Stage 1
Takes the MP8-445C (US07) 12.0 452hp (332kW) 2251Nm from 452hp to 512hp, and 2251Nm to 2548Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 452hp
- Remapped 512hp
- Standard 2251Nm
- Remapped 2548Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 452hp | 512hp | up 60 |
| Torque | 2251Nm | 2548Nm | up 297 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the MP8-445C (US07) 12.0 452hp (332kW) 2251Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy MP8-445C (US07) 12.0 452hp (332kW) 2251Nm, and we check the car over before writing to it.
See the full MP8-445C (US07) 12.0 452hp (332kW) 2251Nm page for every file and figure, the other engines on this MP8 (2005 >), or all Mack Trucks remapping.
Other engines on this MP8 (2005 >)
- MP8-415C (US07) 12.0 420hp (309kW) 2251Nm (420hp)
- MP8-425E (US07) 12.0 431hp (317kW) 2115Nm (431hp)
- MP8-425M (US07) 12.0 431hp (317kW) 2088Nm (431hp)
- MP8-455E (US07) 12.0 461hp (339kW) 2251Nm (461hp)
- MP8-455M (US07) 12.0 461hp (339kW) 2237Nm (461hp)
- MP8-485C (US07) 12.0 492hp (362kW) 2170Nm (492hp)
- MP8-485E (US07) 12.0 492hp (362kW) 2170Nm (492hp)
- MP8-485M (US07) 12.0 492hp (362kW) 2305Nm (492hp)
Book your MP8 (2005 >) Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.