Massey Ferguson 5000 Series All years 5460 116hp (85kW) 471Nm Stage 1
Takes the 5460 116hp (85kW) 471Nm from 116hp to 162hp, and 471Nm to 590Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 116hp
- Remapped 162hp
- Standard 471Nm
- Remapped 590Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 116hp | 162hp | up 46 |
| Torque | 471Nm | 590Nm | up 119 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the 5460 116hp (85kW) 471Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy 5460 116hp (85kW) 471Nm, and we check the car over before writing to it.
See the full 5460 116hp (85kW) 471Nm page for every file and figure, the other engines on this 5000 Series, or all Massey Ferguson remapping.
Other engines on this 5000 Series
- 5420 4.4 80hp (59kW) 346Nm (80hp)
- 5608 3.3 85hp (63kW) 363Nm (85hp)
- 5430 4.4 90hp (66kW) 379Nm (90hp)
- 5609 3.3 95hp (70kW) 405Nm (95hp)
- 5440 4.4 100hp (74kW) 402Nm (100hp)
- 5450 4.4 105hp (77kW) 416Nm (105hp)
- 5455 CR 105hp (77kW) 670Nm (105hp)
- 5610 3.3 105hp (77kW) 413Nm (105hp)
- 5611 3.3 110hp (81kW) 468Nm (110hp)
- 5465 6.0 120hp (88kW) 500Nm (120hp)
- 5612 3.3 120hp (88kW) 502Nm (120hp)
- 5460 CR 124hp (91kW) 471Nm (124hp)
Book your 5000 Series Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.