Engine

Mercedes Atego All years 712 122hp (90kW) 470Nm remap

Standard this engine makes 122hp and 470Nm. Our Stage 1 file takes it to 150hp and 540Nm.

+28horsepower
+70newton metres
1stage available

Where the power arrives

Both curves scaled from the manufacturer figures, on the Stage 1 file.

Power before and after
0418112216201,2001,6002,0002,400 RPM 0418112216201,4002,0002,600hp RPM
  • Standard 122hp
  • Remapped 150hp
Torque before and after
014629243758301,2001,6002,0002,400 RPM 014629243758301,4002,0002,600Nm RPM
  • Standard 470Nm
  • Remapped 540Nm

Stages for this engine

Stage 1 needs nothing fitted. Anything above assumes the supporting hardware is on the car already.

Every figure for the 712 122hp (90kW) 470Nm

FilePowerGainTorqueGainPrice
Standard122hpn/a470Nmn/an/a
Stage 1150hpup 28540Nmup 70ask us

Economy files show no new power figure because they are written for torque and drivability rather than peak output.

Remapping the 712 122hp (90kW) 470Nm

The Mercedes Atego All years 712 122hp (90kW) 470Nm runs a factory calibration built to cope with poor fuel, skipped servicing and hot countries. We rewrite the fuelling, boost and timing for this engine on this car, then test it before you get it back. The original file is kept, so it can go back to standard whenever you want.

On the petrol side the difference shows in throttle response and in how hard it pulls through the top half of the rev range. It feels sharper off idle and keeps going where it used to flatten out.

Figures on this page are for a standard car in good health. We read the fault codes and check the basics first, and if something needs attention we will tell you before we write anything. Have a look at the other engines on the All years, the full Atego range, or everything we do for Mercedes.

Book your Atego

We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.