Scania R-series All years 730 730hp (537kW) 3600Nm Stage 1
Takes the 730 730hp (537kW) 3600Nm from 730hp to 785hp, and 3600Nm to 3820Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 730hp
- Remapped 785hp
- Standard 3600Nm
- Remapped 3820Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 730hp | 785hp | up 55 |
| Torque | 3600Nm | 3820Nm | up 220 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the 730 730hp (537kW) 3600Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy 730 730hp (537kW) 3600Nm, and we check the car over before writing to it.
See the full 730 730hp (537kW) 3600Nm page for every file and figure, the other engines on this R-series, or all Scania remapping.
Other engines on this R-series
- 410 EU6 410hp (301kW) 2150Nm (410hp)
- 450 EU6 450hp (331kW) 2350Nm (450hp)
- 470 470hp (346kW) 2200Nm (470hp)
- 490 EU6 490hp (360kW) 2550Nm (490hp)
- 500 500hp (368kW) 2400Nm (500hp)
- 520 EU6 520hp (382kW) 2700Nm (520hp)
- 560 560hp (412kW) 2700Nm (560hp)
- 580 580hp (426kW) 2750Nm (580hp)
- 580 EU6 580hp (426kW) 2950Nm (580hp)
- 620 620hp (456kW) 3000Nm (620hp)
- 730 EU6 730hp (537kW) 3500Nm (730hp)
Book your R-series Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.