Volvo FH12 All years D12C/D/E 420 420hp (309kW) 2000Nm Stage 1
Takes the D12C/D/E 420 420hp (309kW) 2000Nm from 420hp to 484hp, and 2000Nm to 2300Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 420hp
- Remapped 484hp
- Standard 2000Nm
- Remapped 2300Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 420hp | 484hp | up 64 |
| Torque | 2000Nm | 2300Nm | up 300 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the D12C/D/E 420 420hp (309kW) 2000Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy D12C/D/E 420 420hp (309kW) 2000Nm, and we check the car over before writing to it.
See the full D12C/D/E 420 420hp (309kW) 2000Nm page for every file and figure, the other engines on this FH12, or all Volvo remapping.
Book your FH12 Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.