Audi A8 D4 2010 onwards 3.0 V6 TDI STAGE 1
Takes the 3.0 V6 TDI from 262hp to 310hp, and 580Nm to 650Nm.
Where the gain arrives
Standard against STAGE 1 through the rev range.
- Standard 262hp
- Remapped 310hp
- Standard 580Nm
- Remapped 650Nm
Standard against STAGE 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 262hp | 310hp | up 48 |
| Torque | 580Nm | 650Nm | up 70 |
Other files for this engine
All written for the 3.0 V6 TDI specifically.
What STAGE 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the 3.0 V6 TDI, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy 3.0 V6 TDI, and we check the car over before writing to it.
See the full 3.0 V6 TDI page for every file and figure, the other engines on this A8, or all Audi remapping.
Book your A8 STAGE 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.