Audi Q7 2015 onwards 3.0 TDI CR STAGE 1
Takes the 3.0 TDI CR from 272hp to 320hp, and 600Nm to 680Nm.
Where the gain arrives
Standard against STAGE 1 through the rev range.
- Standard 272hp
- Remapped 320hp
- Standard 600Nm
- Remapped 680Nm
Standard against STAGE 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 272hp | 320hp | up 48 |
| Torque | 600Nm | 680Nm | up 80 |
Other files for this engine
All written for the 3.0 TDI CR specifically.
What STAGE 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the 3.0 TDI CR, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy 3.0 TDI CR, and we check the car over before writing to it.
See the full 3.0 TDI CR page for every file and figure, the other engines on this Q7, or all Audi remapping.
Other engines on this Q7
Book your Q7 STAGE 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.