Caterpillar C15 All years 15.2 DPF 558hp (410kW) 2509Nm Stage 1
Takes the 15.2 DPF 558hp (410kW) 2509Nm from 558hp to 622hp, and 2509Nm to 2880Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 558hp
- Remapped 622hp
- Standard 2509Nm
- Remapped 2880Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 558hp | 622hp | up 64 |
| Torque | 2509Nm | 2880Nm | up 371 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the 15.2 DPF 558hp (410kW) 2509Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy 15.2 DPF 558hp (410kW) 2509Nm, and we check the car over before writing to it.
See the full 15.2 DPF 558hp (410kW) 2509Nm page for every file and figure, the other engines on this C15, or all Caterpillar remapping.
Other engines on this C15
- 14.6 435hp (320kW) 1550Nm (435hp)
- 15.2 DPF 441hp (324kW) 2102Nm (441hp)
- 15.2 Acert 441hp (324kW) 2102Nm (441hp)
- 15.2 Acert 441hp (324kW) 2373Nm (441hp)
- 14.6 475hp (349kW) 1650Nm (475hp)
- 15.2 Acert 481hp (354kW) 2509Nm (481hp)
- 15.2 DPF 481hp (354kW) 2238Nm (481hp)
- 15.2 Acert 481hp (354kW) 2238Nm (481hp)
- 14.6 500hp (368kW) 1650Nm (500hp)
- 15.2 Acert 507hp (373kW) 2509Nm (507hp)
- 15.2 DPF 507hp (373kW) 2509Nm (507hp)
- 14.6 514hp (378kW) 1850Nm (514hp)
Book your C15 Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.