Dacia Logan 2013 onwards 0.9 TCE STAGE 1
Takes the 0.9 TCE from 90hp to 100hp, and 135Nm to 155Nm.
Where the gain arrives
Standard against STAGE 1 through the rev range.
- Standard 90hp
- Remapped 100hp
- Standard 135Nm
- Remapped 155Nm
Standard against STAGE 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 90hp | 100hp | up 10 |
| Torque | 135Nm | 155Nm | up 20 |
Other files for this engine
All written for the 0.9 TCE specifically.
What STAGE 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the 0.9 TCE, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy 0.9 TCE, and we check the car over before writing to it.
See the full 0.9 TCE page for every file and figure, the other engines on this Logan, or all Dacia remapping.
Other engines on this Logan
Book your Logan STAGE 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.