Kia Rio 2017 onwards 1.0 T-GDI STAGE 1
Takes the 1.0 T-GDI from 100hp to 140hp, and 171Nm to 230Nm.
Where the gain arrives
Standard against STAGE 1 through the rev range.
- Standard 100hp
- Remapped 140hp
- Standard 171Nm
- Remapped 230Nm
Standard against STAGE 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 100hp | 140hp | up 40 |
| Torque | 171Nm | 230Nm | up 59 |
Other files for this engine
All written for the 1.0 T-GDI specifically.
What STAGE 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the 1.0 T-GDI, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy 1.0 T-GDI, and we check the car over before writing to it.
See the full 1.0 T-GDI page for every file and figure, the other engines on this Rio, or all Kia remapping.
Other engines on this Rio
Book your Rio STAGE 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.