Nissan X-Trail 2014 onwards 2.0 DCI STAGE 1
Takes the 2.0 DCI from 177hp to 205hp, and 380Nm to 440Nm.
Where the gain arrives
Standard against STAGE 1 through the rev range.
- Standard 177hp
- Remapped 205hp
- Standard 380Nm
- Remapped 440Nm
Standard against STAGE 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 177hp | 205hp | up 28 |
| Torque | 380Nm | 440Nm | up 60 |
Other files for this engine
All written for the 2.0 DCI specifically.
What STAGE 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the 2.0 DCI, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy 2.0 DCI, and we check the car over before writing to it.
See the full 2.0 DCI page for every file and figure, the other engines on this X-Trail, or all Nissan remapping.
Other engines on this X-Trail
Book your X-Trail STAGE 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.