SsangYong Korando 2012 onwards 2.0 e-XDi STAGE 1
Takes the 2.0 e-XDi from 149hp to 185hp, and 360Nm to 450Nm.
Where the gain arrives
Standard against STAGE 1 through the rev range.
- Standard 149hp
- Remapped 185hp
- Standard 360Nm
- Remapped 450Nm
Standard against STAGE 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 149hp | 185hp | up 36 |
| Torque | 360Nm | 450Nm | up 90 |
Other files for this engine
All written for the 2.0 e-XDi specifically.
What STAGE 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the 2.0 e-XDi, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy 2.0 e-XDi, and we check the car over before writing to it.
See the full 2.0 e-XDi page for every file and figure, the other engines on this Korando, or all SsangYong remapping.
Other engines on this Korando
Book your Korando STAGE 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.