Volkswagen Transporter/Multivan T5 2009 to 2015 2.0 TDi STAGE 1
Takes the 2.0 TDi from 114hp to 175hp, and 250Nm to 400Nm.
Where the gain arrives
Standard against STAGE 1 through the rev range.
- Standard 114hp
- Remapped 175hp
- Standard 250Nm
- Remapped 400Nm
Standard against STAGE 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 114hp | 175hp | up 61 |
| Torque | 250Nm | 400Nm | up 150 |
Other files for this engine
All written for the 2.0 TDi specifically.
What STAGE 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the 2.0 TDi, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy 2.0 TDi, and we check the car over before writing to it.
See the full 2.0 TDi page for every file and figure, the other engines on this Transporter/Multivan, or all Volkswagen remapping.
Other engines on this Transporter/Multivan
Book your Transporter/Multivan STAGE 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.