Audi A4 B8 Mk1 2008 to 2011 3.0 TDi DPF STAGE 1
Takes the 3.0 TDi DPF from 240hp to 300hp, and 500Nm to 600Nm.
Where the gain arrives
Standard against STAGE 1 through the rev range.
- Standard 240hp
- Remapped 300hp
- Standard 500Nm
- Remapped 600Nm
Standard against STAGE 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 240hp | 300hp | up 60 |
| Torque | 500Nm | 600Nm | up 100 |
Other files for this engine
All written for the 3.0 TDi DPF specifically.
What STAGE 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the 3.0 TDi DPF, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy 3.0 TDi DPF, and we check the car over before writing to it.
See the full 3.0 TDi DPF page for every file and figure, the other engines on this A4, or all Audi remapping.
Book your A4 STAGE 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.