Engine

Claas Axion All years 850 6.8 R6 224hp (165kW) 1020Nm remap

Standard this engine makes 224hp and 1020Nm. Our Stage 1 file takes it to 280hp and 1280Nm.

+56horsepower
+260newton metres
1stage available

Where the power arrives

Both curves scaled from the manufacturer figures, on the Stage 1 file.

Power before and after
07615122730201,2001,6002,0002,400 RPM 07615122730201,4002,0002,600hp RPM
  • Standard 224hp
  • Remapped 280hp
Torque before and after
03466911037138201,2001,6002,0002,400 RPM 03466911037138201,4002,0002,600Nm RPM
  • Standard 1020Nm
  • Remapped 1280Nm

Stages for this engine

Stage 1 needs nothing fitted. Anything above assumes the supporting hardware is on the car already.

Every figure for the 850 6.8 R6 224hp (165kW) 1020Nm

FilePowerGainTorqueGainPrice
Standard224hpn/a1020Nmn/an/a
Stage 1280hpup 561280Nmup 260ask us

Economy files show no new power figure because they are written for torque and drivability rather than peak output.

Remapping the 850 6.8 R6 224hp (165kW) 1020Nm

The Claas Axion All years 850 6.8 R6 224hp (165kW) 1020Nm runs a factory calibration built to cope with poor fuel, skipped servicing and hot countries. We rewrite the fuelling, boost and timing for this engine on this car, then test it before you get it back. The original file is kept, so it can go back to standard whenever you want.

On the petrol side the difference shows in throttle response and in how hard it pulls through the top half of the rev range. It feels sharper off idle and keeps going where it used to flatten out.

Figures on this page are for a standard car in good health. We read the fault codes and check the basics first, and if something needs attention we will tell you before we write anything. Have a look at the other engines on the All years, the full Axion range, or everything we do for Claas.

Book your Axion

We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.