DAF CF Euro6 All years PX7 (EU6) 310hp (228kW) 1100Nm remap
Standard this engine makes 310hp and 1100Nm. Our Stage 1 file takes it to 340hp and 1345Nm.
Where the power arrives
Both curves scaled from the manufacturer figures, on the Stage 1 file.
- Standard 310hp
- Remapped 340hp
- Standard 1100Nm
- Remapped 1345Nm
Stages for this engine
Stage 1 needs nothing fitted. Anything above assumes the supporting hardware is on the car already.
Every figure for the PX7 (EU6) 310hp (228kW) 1100Nm
| File | Power | Gain | Torque | Gain | Price |
|---|---|---|---|---|---|
| Standard | 310hp | n/a | 1100Nm | n/a | n/a |
| Stage 1 | 340hp | up 30 | 1345Nm | up 245 | ask us |
Economy files show no new power figure because they are written for torque and drivability rather than peak output.
Remapping the PX7 (EU6) 310hp (228kW) 1100Nm
The DAF CF Euro6 All years PX7 (EU6) 310hp (228kW) 1100Nm runs a factory calibration built to cope with poor fuel, skipped servicing and hot countries. We rewrite the fuelling, boost and timing for this engine on this car, then test it before you get it back. The original file is kept, so it can go back to standard whenever you want.
On the petrol side the difference shows in throttle response and in how hard it pulls through the top half of the rev range. It feels sharper off idle and keeps going where it used to flatten out.
Figures on this page are for a standard car in good health. We read the fault codes and check the basics first, and if something needs attention we will tell you before we write anything. Have a look at the other engines on the All years, the full CF Euro6 range, or everything we do for DAF.
Other engines on this CF Euro6
All years cars.
- PX7 (EU6) 220hp (162kW) 850Nm220hp standard
- PX7 (EU6) 250hp (184kW) 950Nm250hp standard
- PX7 (EU6) 280hp (206kW) 1020Nm280hp standard
- MX11 (EU6) 290hp (213kW) 1200Nm290hp standard
- MX11 (EU6) 330hp (243kW) 1400Nm330hp standard
- MX11 (EU6) 370hp (272kW) 1600Nm370hp standard
- MX11 (EU6) 400hp (294kW) 1900Nm400hp standard
- MX13 (EU6) 410hp (301kW) 2000Nm410hp standard
- MX11 (EU6) 440hp (324kW) 2100Nm440hp standard
- MX13 (EU6) 460hp (338kW) 2300Nm460hp standard
- MX13 (EU6) 510hp (375kW) 2500Nm510hp standard
Book your CF Euro6
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.