Iveco Stralis All years Cursor13 - 12.9 (EU6) 510hp (375kW) 2300Nm Stage 1
Takes the Cursor13 - 12.9 (EU6) 510hp (375kW) 2300Nm from 510hp to 588hp, and 2300Nm to 2700Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 510hp
- Remapped 588hp
- Standard 2300Nm
- Remapped 2700Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 510hp | 588hp | up 78 |
| Torque | 2300Nm | 2700Nm | up 400 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the Cursor13 - 12.9 (EU6) 510hp (375kW) 2300Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy Cursor13 - 12.9 (EU6) 510hp (375kW) 2300Nm, and we check the car over before writing to it.
See the full Cursor13 - 12.9 (EU6) 510hp (375kW) 2300Nm page for every file and figure, the other engines on this Stralis, or all Iveco remapping.
Other engines on this Stralis
- S27 273hp (201kW) 950Nm (273hp)
- Cursor9 - 8.7 (EU6) 310hp (228kW) 1300Nm (310hp)
- S31 310hp (228kW) 1300Nm (310hp)
- Cursor9 - 8.7 (EU6) 330hp (243kW) 1400Nm (330hp)
- S33 330hp (243kW) 1400Nm (330hp)
- S35 350hp (257kW) 1280Nm (350hp)
- Cursor9 - 8.7 (EU6) 360hp (265kW) 1650Nm (360hp)
- S36 360hp (265kW) 1500Nm (360hp)
- Cursor9 - 8.7 (EU6) 400hp (294kW) 1700Nm (400hp)
- S40 400hp (294kW) 1800Nm (400hp)
- Cursor11 - 11.1 (EU6) 420hp (309kW) 2000Nm (420hp)
- S42 420hp (309kW) 1900Nm (420hp)
Book your Stralis Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.