Iveco Stralis All years Cursor9 - 8.7 (EU6) 330hp (243kW) 1400Nm Stage 1
Takes the Cursor9 - 8.7 (EU6) 330hp (243kW) 1400Nm from 330hp to 395hp, and 1400Nm to 1780Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 330hp
- Remapped 395hp
- Standard 1400Nm
- Remapped 1780Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 330hp | 395hp | up 65 |
| Torque | 1400Nm | 1780Nm | up 380 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the Cursor9 - 8.7 (EU6) 330hp (243kW) 1400Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy Cursor9 - 8.7 (EU6) 330hp (243kW) 1400Nm, and we check the car over before writing to it.
See the full Cursor9 - 8.7 (EU6) 330hp (243kW) 1400Nm page for every file and figure, the other engines on this Stralis, or all Iveco remapping.
Other engines on this Stralis
- S27 273hp (201kW) 950Nm (273hp)
- Cursor9 - 8.7 (EU6) 310hp (228kW) 1300Nm (310hp)
- S31 310hp (228kW) 1300Nm (310hp)
- S33 330hp (243kW) 1400Nm (330hp)
- S35 350hp (257kW) 1280Nm (350hp)
- Cursor9 - 8.7 (EU6) 360hp (265kW) 1650Nm (360hp)
- S36 360hp (265kW) 1500Nm (360hp)
- Cursor9 - 8.7 (EU6) 400hp (294kW) 1700Nm (400hp)
- S40 400hp (294kW) 1800Nm (400hp)
- Cursor11 - 11.1 (EU6) 420hp (309kW) 2000Nm (420hp)
- S42 420hp (309kW) 1900Nm (420hp)
- S43 430hp (316kW) 1900Nm (430hp)
Book your Stralis Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.