Iveco Stralis All years S27 273hp (201kW) 950Nm Stage 1
Takes the S27 273hp (201kW) 950Nm from 273hp to 313hp, and 950Nm to 1090Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 273hp
- Remapped 313hp
- Standard 950Nm
- Remapped 1090Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 273hp | 313hp | up 40 |
| Torque | 950Nm | 1090Nm | up 140 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the S27 273hp (201kW) 950Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy S27 273hp (201kW) 950Nm, and we check the car over before writing to it.
See the full S27 273hp (201kW) 950Nm page for every file and figure, the other engines on this Stralis, or all Iveco remapping.
Other engines on this Stralis
- Cursor9 - 8.7 (EU6) 310hp (228kW) 1300Nm (310hp)
- S31 310hp (228kW) 1300Nm (310hp)
- Cursor9 - 8.7 (EU6) 330hp (243kW) 1400Nm (330hp)
- S33 330hp (243kW) 1400Nm (330hp)
- S35 350hp (257kW) 1280Nm (350hp)
- Cursor9 - 8.7 (EU6) 360hp (265kW) 1650Nm (360hp)
- S36 360hp (265kW) 1500Nm (360hp)
- Cursor9 - 8.7 (EU6) 400hp (294kW) 1700Nm (400hp)
- S40 400hp (294kW) 1800Nm (400hp)
- Cursor11 - 11.1 (EU6) 420hp (309kW) 2000Nm (420hp)
- S42 420hp (309kW) 1900Nm (420hp)
- S43 430hp (316kW) 1900Nm (430hp)
Book your Stralis Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.