Iveco Stralis All years S36 360hp (265kW) 1500Nm Stage 1
Takes the S36 360hp (265kW) 1500Nm from 360hp to 412hp, and 1500Nm to 1718Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 360hp
- Remapped 412hp
- Standard 1500Nm
- Remapped 1718Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 360hp | 412hp | up 52 |
| Torque | 1500Nm | 1718Nm | up 218 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the S36 360hp (265kW) 1500Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy S36 360hp (265kW) 1500Nm, and we check the car over before writing to it.
See the full S36 360hp (265kW) 1500Nm page for every file and figure, the other engines on this Stralis, or all Iveco remapping.
Other engines on this Stralis
- S27 273hp (201kW) 950Nm (273hp)
- Cursor9 - 8.7 (EU6) 310hp (228kW) 1300Nm (310hp)
- S31 310hp (228kW) 1300Nm (310hp)
- Cursor9 - 8.7 (EU6) 330hp (243kW) 1400Nm (330hp)
- S33 330hp (243kW) 1400Nm (330hp)
- S35 350hp (257kW) 1280Nm (350hp)
- Cursor9 - 8.7 (EU6) 360hp (265kW) 1650Nm (360hp)
- Cursor9 - 8.7 (EU6) 400hp (294kW) 1700Nm (400hp)
- S40 400hp (294kW) 1800Nm (400hp)
- Cursor11 - 11.1 (EU6) 420hp (309kW) 2000Nm (420hp)
- S42 420hp (309kW) 1900Nm (420hp)
- S43 430hp (316kW) 1900Nm (430hp)
Book your Stralis Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.