Iveco Stralis All years S40 400hp (294kW) 1800Nm Stage 1
Takes the S40 400hp (294kW) 1800Nm from 400hp to 457hp, and 1800Nm to 2060Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 400hp
- Remapped 457hp
- Standard 1800Nm
- Remapped 2060Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 400hp | 457hp | up 57 |
| Torque | 1800Nm | 2060Nm | up 260 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the S40 400hp (294kW) 1800Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy S40 400hp (294kW) 1800Nm, and we check the car over before writing to it.
See the full S40 400hp (294kW) 1800Nm page for every file and figure, the other engines on this Stralis, or all Iveco remapping.
Other engines on this Stralis
- S27 273hp (201kW) 950Nm (273hp)
- Cursor9 - 8.7 (EU6) 310hp (228kW) 1300Nm (310hp)
- S31 310hp (228kW) 1300Nm (310hp)
- Cursor9 - 8.7 (EU6) 330hp (243kW) 1400Nm (330hp)
- S33 330hp (243kW) 1400Nm (330hp)
- S35 350hp (257kW) 1280Nm (350hp)
- Cursor9 - 8.7 (EU6) 360hp (265kW) 1650Nm (360hp)
- S36 360hp (265kW) 1500Nm (360hp)
- Cursor9 - 8.7 (EU6) 400hp (294kW) 1700Nm (400hp)
- Cursor11 - 11.1 (EU6) 420hp (309kW) 2000Nm (420hp)
- S42 420hp (309kW) 1900Nm (420hp)
- S43 430hp (316kW) 1900Nm (430hp)
Book your Stralis Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.