Man TGS All years D2066 10.5 (EU6) 400hp (294kW) 1900Nm Stage 1
Takes the D2066 10.5 (EU6) 400hp (294kW) 1900Nm from 400hp to 478hp, and 1900Nm to 2286Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 400hp
- Remapped 478hp
- Standard 1900Nm
- Remapped 2286Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 400hp | 478hp | up 78 |
| Torque | 1900Nm | 2286Nm | up 386 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the D2066 10.5 (EU6) 400hp (294kW) 1900Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy D2066 10.5 (EU6) 400hp (294kW) 1900Nm, and we check the car over before writing to it.
See the full D2066 10.5 (EU6) 400hp (294kW) 1900Nm page for every file and figure, the other engines on this TGS, or all Man remapping.
Other engines on this TGS
- D2066 10.5 (EU6) 320hp (235kW) 1600Nm (320hp)
- TGS 320 320hp (235kW) 1600Nm (320hp)
- D2066 10.5 (EU6) 360hp (265kW) 1800Nm (360hp)
- TGS 360 360hp (265kW) 1800Nm (360hp)
- TGS 400 400hp (294kW) 1900Nm (400hp)
- D2676 12.4 (EU6) 440hp (324kW) 2100Nm (440hp)
- TGS 440 440hp (324kW) 2100Nm (440hp)
- TGS 460 460hp (338kW) 2100Nm (460hp)
- D2676 12.4 (EU6) 480hp (353kW) 2300Nm (480hp)
- TGS 480 480hp (353kW) 2300Nm (480hp)
- TGS 540 540hp (397kW) 2500Nm (540hp)
Book your TGS Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.