Man TGS All years D2676 12.4 (EU6) 480hp (353kW) 2300Nm Stage 1
Takes the D2676 12.4 (EU6) 480hp (353kW) 2300Nm from 480hp to 572hp, and 2300Nm to 2780Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 480hp
- Remapped 572hp
- Standard 2300Nm
- Remapped 2780Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 480hp | 572hp | up 92 |
| Torque | 2300Nm | 2780Nm | up 480 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the D2676 12.4 (EU6) 480hp (353kW) 2300Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy D2676 12.4 (EU6) 480hp (353kW) 2300Nm, and we check the car over before writing to it.
See the full D2676 12.4 (EU6) 480hp (353kW) 2300Nm page for every file and figure, the other engines on this TGS, or all Man remapping.
Other engines on this TGS
- D2066 10.5 (EU6) 320hp (235kW) 1600Nm (320hp)
- TGS 320 320hp (235kW) 1600Nm (320hp)
- D2066 10.5 (EU6) 360hp (265kW) 1800Nm (360hp)
- TGS 360 360hp (265kW) 1800Nm (360hp)
- D2066 10.5 (EU6) 400hp (294kW) 1900Nm (400hp)
- TGS 400 400hp (294kW) 1900Nm (400hp)
- D2676 12.4 (EU6) 440hp (324kW) 2100Nm (440hp)
- TGS 440 440hp (324kW) 2100Nm (440hp)
- TGS 460 460hp (338kW) 2100Nm (460hp)
- TGS 480 480hp (353kW) 2300Nm (480hp)
- TGS 540 540hp (397kW) 2500Nm (540hp)
Book your TGS Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.