Steyr 6000serie All years 6125 126hp (93kW) 593Nm Stage 1
Takes the 6125 126hp (93kW) 593Nm from 126hp to 148hp, and 593Nm to 648Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 126hp
- Remapped 148hp
- Standard 593Nm
- Remapped 648Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 126hp | 148hp | up 22 |
| Torque | 593Nm | 648Nm | up 55 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the 6125 126hp (93kW) 593Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy 6125 126hp (93kW) 593Nm, and we check the car over before writing to it.
See the full 6125 126hp (93kW) 593Nm page for every file and figure, the other engines on this 6000serie, or all Steyr remapping.
Other engines on this 6000serie
- 6115 116hp (85kW) 520Nm (116hp)
- 6125 125hp (92kW) 566Nm (125hp)
- 6130 6.7 CVT 133hp (98kW) 631Nm (133hp)
- 6135 136hp (100kW) 612Nm (136hp)
- 6135 CVT 137hp (101kW) 570Nm (137hp)
- 6140 141hp (104kW) 613Nm (141hp)
- 6140 CVT 141hp (104kW) 585Nm (141hp)
- 6145 CVT 147hp (108kW) 610Nm (147hp)
- 6145 6.7 CVT Ecotech 148hp (109kW) 698Nm (148hp)
- 6150 CVT 151hp (111kW) 520Nm (151hp)
- 6155 CVT 156hp (115kW) 660Nm (156hp)
- 6160 CVT 160hp (118kW) 675Nm (160hp)
Book your 6000serie Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.