DAF CF Euro6 All years MX11 (EU6) 440hp (324kW) 2100Nm Stage 1
Takes the MX11 (EU6) 440hp (324kW) 2100Nm from 440hp to 485hp, and 2100Nm to 2185Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 440hp
- Remapped 485hp
- Standard 2100Nm
- Remapped 2185Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 440hp | 485hp | up 45 |
| Torque | 2100Nm | 2185Nm | up 85 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the MX11 (EU6) 440hp (324kW) 2100Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy MX11 (EU6) 440hp (324kW) 2100Nm, and we check the car over before writing to it.
See the full MX11 (EU6) 440hp (324kW) 2100Nm page for every file and figure, the other engines on this CF Euro6, or all DAF remapping.
Other engines on this CF Euro6
- PX7 (EU6) 220hp (162kW) 850Nm (220hp)
- PX7 (EU6) 250hp (184kW) 950Nm (250hp)
- PX7 (EU6) 280hp (206kW) 1020Nm (280hp)
- MX11 (EU6) 290hp (213kW) 1200Nm (290hp)
- PX7 (EU6) 310hp (228kW) 1100Nm (310hp)
- MX11 (EU6) 330hp (243kW) 1400Nm (330hp)
- MX11 (EU6) 370hp (272kW) 1600Nm (370hp)
- MX11 (EU6) 400hp (294kW) 1900Nm (400hp)
- MX13 (EU6) 410hp (301kW) 2000Nm (410hp)
- MX13 (EU6) 460hp (338kW) 2300Nm (460hp)
- MX13 (EU6) 510hp (375kW) 2500Nm (510hp)
Book your CF Euro6 Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.