DAF CF Euro6 All years MX13 (EU6) 460hp (338kW) 2300Nm Stage 1
Takes the MX13 (EU6) 460hp (338kW) 2300Nm from 460hp to 515hp, and 2300Nm to 2620Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 460hp
- Remapped 515hp
- Standard 2300Nm
- Remapped 2620Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 460hp | 515hp | up 55 |
| Torque | 2300Nm | 2620Nm | up 320 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the MX13 (EU6) 460hp (338kW) 2300Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy MX13 (EU6) 460hp (338kW) 2300Nm, and we check the car over before writing to it.
See the full MX13 (EU6) 460hp (338kW) 2300Nm page for every file and figure, the other engines on this CF Euro6, or all DAF remapping.
Other engines on this CF Euro6
- PX7 (EU6) 220hp (162kW) 850Nm (220hp)
- PX7 (EU6) 250hp (184kW) 950Nm (250hp)
- PX7 (EU6) 280hp (206kW) 1020Nm (280hp)
- MX11 (EU6) 290hp (213kW) 1200Nm (290hp)
- PX7 (EU6) 310hp (228kW) 1100Nm (310hp)
- MX11 (EU6) 330hp (243kW) 1400Nm (330hp)
- MX11 (EU6) 370hp (272kW) 1600Nm (370hp)
- MX11 (EU6) 400hp (294kW) 1900Nm (400hp)
- MX13 (EU6) 410hp (301kW) 2000Nm (410hp)
- MX11 (EU6) 440hp (324kW) 2100Nm (440hp)
- MX13 (EU6) 510hp (375kW) 2500Nm (510hp)
Book your CF Euro6 Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.