DAF CF Euro6 All years MX13 (EU6) 510hp (375kW) 2500Nm Stage 1
Takes the MX13 (EU6) 510hp (375kW) 2500Nm from 510hp to 575hp, and 2500Nm to 2730Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 510hp
- Remapped 575hp
- Standard 2500Nm
- Remapped 2730Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 510hp | 575hp | up 65 |
| Torque | 2500Nm | 2730Nm | up 230 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the MX13 (EU6) 510hp (375kW) 2500Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy MX13 (EU6) 510hp (375kW) 2500Nm, and we check the car over before writing to it.
See the full MX13 (EU6) 510hp (375kW) 2500Nm page for every file and figure, the other engines on this CF Euro6, or all DAF remapping.
Other engines on this CF Euro6
- PX7 (EU6) 220hp (162kW) 850Nm (220hp)
- PX7 (EU6) 250hp (184kW) 950Nm (250hp)
- PX7 (EU6) 280hp (206kW) 1020Nm (280hp)
- MX11 (EU6) 290hp (213kW) 1200Nm (290hp)
- PX7 (EU6) 310hp (228kW) 1100Nm (310hp)
- MX11 (EU6) 330hp (243kW) 1400Nm (330hp)
- MX11 (EU6) 370hp (272kW) 1600Nm (370hp)
- MX11 (EU6) 400hp (294kW) 1900Nm (400hp)
- MX13 (EU6) 410hp (301kW) 2000Nm (410hp)
- MX11 (EU6) 440hp (324kW) 2100Nm (440hp)
- MX13 (EU6) 460hp (338kW) 2300Nm (460hp)
Book your CF Euro6 Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.