Engine

DAF CF85 All years MX265 12.9L 360hp (265kW) 1775Nm remap

Standard this engine makes 360hp and 1775Nm. Our Stage 1 file takes it to 405hp and 2020Nm.

+45horsepower
+245newton metres
1stage available

Where the power arrives

Both curves scaled from the manufacturer figures, on the Stage 1 file.

Power before and after
010921932843701,2001,6002,0002,400 RPM 010921932843701,4002,0002,600hp RPM
  • Standard 360hp
  • Remapped 405hp
Torque before and after
054510911636218201,2001,6002,0002,400 RPM 054510911636218201,4002,0002,600Nm RPM
  • Standard 1775Nm
  • Remapped 2020Nm

Stages for this engine

Stage 1 needs nothing fitted. Anything above assumes the supporting hardware is on the car already.

Every figure for the MX265 12.9L 360hp (265kW) 1775Nm

FilePowerGainTorqueGainPrice
Standard360hpn/a1775Nmn/an/a
Stage 1405hpup 452020Nmup 245ask us

Economy files show no new power figure because they are written for torque and drivability rather than peak output.

Remapping the MX265 12.9L 360hp (265kW) 1775Nm

The DAF CF85 All years MX265 12.9L 360hp (265kW) 1775Nm runs a factory calibration built to cope with poor fuel, skipped servicing and hot countries. We rewrite the fuelling, boost and timing for this engine on this car, then test it before you get it back. The original file is kept, so it can go back to standard whenever you want.

On the petrol side the difference shows in throttle response and in how hard it pulls through the top half of the rev range. It feels sharper off idle and keeps going where it used to flatten out.

Figures on this page are for a standard car in good health. We read the fault codes and check the basics first, and if something needs attention we will tell you before we write anything. Have a look at the other engines on the All years, the full CF85 range, or everything we do for DAF.

Book your CF85

We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.